TANAKA TRADING offers lineups with a focus on customization parts for 4mini. Their products are unmissable for all riders hoping for a unique motorcycle or individual customization.
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
I consulted with a motorcycle shop because my Maguna 50, which is a very beautiful car with 8,000km on the clock, was not running well (cause unknown), and they pointed out that the cause was a bad Ta...
I can't install the OEM Handlebar or the Mukawa Handlebar at all on one side.The hole on the Holder side was too small to fit, so I had to cut the hole and widen it and cut the Handlebar Pipe to fit.T...
3.5jThe Center of the Large body comes out both front and rear by pontooning, but there is some flex when you rotate it.That's the Chinese, BALI is terrible.
This is one of the few Chinese Tanks that can use 5LOEMCap.Tank cap (Garbage), Cook and Spacer are included, and you need to be careful not to damage the screw holes on the frame.Please note that the ...
I used it on my '01 MONKEY.The position of the Fuel Cock has changed 180? since the engine was bored up and the carburetor was replaced, so I used to reverse the Normal cook, but when I reverse it, th...
Replaced because it didn't rotate more than Idling and got bumped.Compared to the price of OEM Parts CDI, the price is much lower and the performance is the same.The Coupler shape was also OK, and it ...
This is a replacement for an old CUBC70Z2 from around 1970 that leaked gasoline when moved from the RES position. I am satisfied with the product.
First off, for a brand new one, I think the price is unbeatable!When the product finally arrives, the Instruction Manual is unreadable because I don't know what language it is.But if you only have a h...
So good ! 제 바이크 ape100에 장착하녔습니다 손쉽게 장착하였고 정말 편리하고 이쁩니다 다음에는 다른색상도 구입하고 싶네요. 순정 헤드라이트에 별도 제품없이 장착하였습니다. 라이트 밸브밸브?만 순정에서 빼외서 썻습니다 너무 좋아요
----------------------------------------------------------
...
First of all, the hole accuracy of Flange was not good and it was impossible to install without machining.Because it did not come off with the part Single Body even if it expanded the hole, it corresp...
 |  | |
| | |
Although it is said to be compatible with the MONKEY, in reality, it interferes with the chain case cover of the STD of AB27 and Z50J and cannot be installed without additional processing with a grind...
The Honda Retro style emblem has a nice texture and is mounted under the head lamp, so it stands out when looking at the motorcycle from the front. The only downside is that it can be stolen and may f...
I used it as a substitute for OEM, but I am satisfied with the cheap price for the same etc. as OEM.
I used it for my first MONKEY assembly, I don't know the OEM and I'm happy with the texture.
I was worried because the price was too cheap, but I can use it normally.Well, I don't want it to be useless.So far, there are no problems.
The lever is structurally different from the photo posted in the store. Due to the incorrect connection, the lip rests against the engine housing and it is not possible to change gears. Also, the work...
I installed it on SUPER CUB90 with Brake Adapter. How about installing it with a sense of fun?
I bought it to put the Engine with Clutch on my CHALYThe Clutch lever does not have the necessary Clutch Cable length adjustment screw Hmm How do I fine-tune it? Maybe it's exclusive to some model of ...
 |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | |
I bought this for maintenance around the Rear of my MONKEY125.Quantity:Pair (for Left and Right) The position in the direction can be moved freely, and the height can be set to Quantity:Pair (for Left...
It is a good product 。 Wood, needle, wire brush hair (Wire) I used to substitute with etc., but the dedicated product is still good.However, it is inevitable in nature, but the finer the material, the...
The mounting bracket is totally skewed.. Had contact with seller but did not solve the problem. Only siad it could be mounted even with a skewed bracket, but that's NOT what I want in my Chaly! Can't ...
It's the same for Z125PRO to be able to change the sprocket and fork oil I bought the Minimoto MONKEY, DAX compatibleThe body weighs 15kg, so the sense of stability when working is good, but it is not...
I bought it to learn maintenance of my Motorcycle I mainly touched the front area and link type Mono Suspension area The Jack itself is quite heavy (15kg!) to accommodate motorcycles of all weights I...
It takes more than 4 days for delivery, it is ineffective with defective items!To be honest, it was disappointing. For the time being, Pipe was connected upside down, the cracks were blocked with Viny...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
About our "Mybike" service 
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING