[Set components] ・Retainer 4 pcs made in A2011 (Aluminum alloy, Blue anodized finish) ・4 chromoly bolts (4mm hexagon tightening) ・Washer for strength adjustment 1.0mm x 8pcs
*The video is for SELOW 250 and others. *The tightening torque is 10Nm specified by the manufacturer.It's very loose and won't come loose.Please refer to the manual of each model. *The parts composition is different between YZF-R3 (MT-03) and YZF-R25 (MT-25), but both are compatible. *Images may contain other products. *There may be changes in product specifications due to the manufacturer's reasons.
■This part suppresses abnormal vibration from the clutch spring and improves the operating accuracy.
The clutch spring is made of long wire, which vibrates. This is transmitted to the pressure plate and causes the whole clutch to vibrate. When it is vibrating, it gently slides and breaks. In addition, when the whole system vibrates, friction occurs between the separated discs and various parts, causing dragging. It'll raise the temperature. When the drag is reduced, the gears are not under load and can be shifted lightly. It's the dragging that makes it change with a bang and a whimper, and every time it does, it's reduced or missing in various ways.
[effect] ・Smooth disengagement of the clutch. ・The touch becomes better, and you can control the half club with a short stroke.It is also popular with people with small hands. ・It's easy to make a connection without slipping, front up and start dash! ・Since the vibration of the clutch as a whole is reduced, drag is reduced and "light shifting" can be done. ・The shift shock will be reduced, and it will be gentle to the transmission, and the heat generation will be reduced, and the deterioration of oil will be reduced. ・The friction loss is reduced and the grip becomes lighter. ・Judder reduction. ・Improved durability of the disc. ・The strength can be fine-tuned by using washers.Even if you put two washers in each to lighten the grip, the touch will be better than stock. ・It has the same effect as the clutch spring retainer for SELO 250.
[Installation] 1: Insert washers as necessary into the bolted retainer. 2: Put the spring in and insert the retainer with the bolt. 3: Tighten the bolts temporarily, and then tighten them diagonally after all four bolts are in place. *The tightening torque is 10Nm specified by the manufacturer.It's very loose and won't come loose.Please refer to the manual of each model.
The washer is fully secured when the bolt is tightened. The more you add, the less the spring is tightened and the lighter it becomes.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!