It has done its job sitting below the clutch to separator the oil in the right crankcase half

This was another part that was needed for the CB1000R that came in. This was in need of a new o-ring for the right side crank case cover that was also being changed. It just makes sense to change the o-ring too as the old one was not great. I did not know the history of this bike and with checking the old o-ring, it certainly needed a new one. I found the right o-ring by using the tools Webike provide on their help section and then cross referencing with Honda schematics for my own peace of mind. I did have a couple of other parts I needed to order so I just got them all at the same time. My preferred courier is EMS as they just get the orders to me fast and efficiently. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. This o-ring was inside the standard Honda packet and was in perfect condition. The quality is brilliant. It is a nicely made o-ring and there were no extra bits of rubber attached like you get with some after market brands. I double checked the diameter and it was exactly as it should be. I wipe a little oil on the o-ring in this section as it helps to stop from pinching or breaking the new o-ring upon install. Once fitted, there is a nice tight seal with zero leaks, even after a steady warm up. Great purchase, very happy customer. Thank you Webike. View Detail

I recommend with a clear conscience, very well secured individual products and the entire package.100% original products in original manufacturer's packaging.At affordable prices even after customs and fiscal charges.I will definitely recommend the web!ke website and I will use it myself..View Detail

About quality and texture - The clutch pressure plate from Honda is made from aluminium and cast into shape, the quality from the overall fit and finish is perfect.About the feeling of use - For the low price, I decided to modify a new part and retain my original. I was interested in upgrading my clutch lifter plate from a three bolt to a six bolt and needed a clutch pressure plate with all six posts drilled and tapped to accept the clutch lifter plate. Has worked out well.Products to buy together - A key product to buy together with the clutch pressure plate for my upgrade was the six bolt clutch lifter plate but there are many other parts to also upgrade, the main being the clutch springs.Difficulty of installation - The installation of the clutch pressure plate is a advanced task that took 1.5 hours to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the clutch once assembled to the transmission main shaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the clutch pressure plate is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the clutch pressure plate, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The oil filter rotor from Honda is made from steel and weighs in at one kilogram, the quality from the overall fit and finish is perfect.About the feeling of use - Not a part that most people would need to purchase, however it you are looking for less weight on the crankshaft this can be easily machined down to half it's weight equalling five hundred grams.Products to buy together - A key product to buy together with the oil filter rotor for me was a forth bearing support from SP Takegawa. This allowed me to confidently ride the Grom hard without the fear of breaking the crankshaft.Difficulty of installation - The installation of the oil filter rotoris a intermediate task that took 1.0 hour to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the oil filter rotor to the cranksshaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the oil filter rotor is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter rotor, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The oil filter cover gasket from Honda is a metal reinforced paper gasket, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable oil leak from the old gasket but since the oil filter cover had been removed and installed a few times I thought it best to replace the gasket this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new gasket for the clutch cover as this cover is removed quite regularly for access to clean the oil filter rotor and filter screen.Difficulty of installation - The installation of the oil filter cover gasket is an simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is required to secure the between the oil filter and it's cover, note the orientation of the gasket for correct installation.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the oil filter cover gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter cover gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of cast aluminum for the crankcase cover, forged aluminum for the clutch access cover and machined aluminum for the oil filter cover.About the feeling of use, I also have experience using the Kitaco clutch cover and overall I find the Takegawa clutch cover to be the better option to purchase.Products to buy together, Adding an adjustable clutch lever to your cart to help personalization your clutch setup would be ideal.Difficulty of installation, I can say the fitment of the clutch cover kit for my installation was average, there is special tooling needed and the process of removing the unwanted original Honda parts and installing the new Takegawa parts is involved.Cost performance and comparison with other products, The pricing of this product is great when compared to all the other types of clutch cover kits that Takegawa offer because you a utilising all the original clutch parts. You receive a complete kit that is made from quality materials with a design ahead of the others .About shipping and packaging My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish.About the feeling of use, This set of Honda stickers just look great on the fuel tank of my custom build and even with the bike spending most of it's life out in the sun the black and gold colouring shows no signs of fading.Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding.Difficulty of installation, I can say the fitment of the stickers for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the stickers to help the adhesive have the best chance of adhering to the plastic.Cost performance and comparison with other products, The pricing of this product is great. Your receive two strickers that are of a good size and great quality from a well known brand. The pricing of stickers similar to these that are part number specific to a bike will be much higher.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This cool G-Craft sticker is the perfect size for adding to the side cover on the Monkey 125 to complement your G-Craft build with this fine detail.Products to buy together, Other branded stickers from the likes of Kitaco, SP Takegawa and Over Racing would be ideal to add to my cart for some additional detailing for parts I have added to my Honda Monkey 125.Difficulty of installation, I can say the fitment of the sticker for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the sticker to help the adhesive have the best chance of adhering to the paint.Cost performance and comparison with other products, The pricing of this product is good and but higher per sticker to what other brands offer. You receive one stricker that are great quality with fine detailing from a well known brand.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This Moriwaki trademark sticker is the perfect size for adding a little detail to those plain black plastic parts on the bike like the hugger.Products to buy together, Other branded stickers from the likes of Takegawa, NGK and DID would be ideal to add to your cart for some additional detailing since they sell many parts for bikes.Difficulty of installation, I can say the fitment of the sticker for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the sticker to help the adhesive have the best chance of adhering to the plastic.Cost performance and comparison with other products, The pricing of this product is great and similar to what other brands offer. You receive a two strickers that is a handy size and great quality from a well known brand.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used is aluminum for the muffler sleeve and stainless steel for the header pipe.About the feeling of use, I bought this exhaust system as I was looking for a low mount high performance system at an affordable price. Big performance header pipe with a 25mm inlet and 50mm outlet to help obtain the most out of my modified engine and comes with a unique shaped aluminum muffler sleeve.Products to buy together, Being a low mount exhaust system, the side of the Monkey 125 is left exposed when the high mount exhaust system is removed so a right side cover would be ideal to also add to your cart.Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from one end to the other lined up perfectly.Cost performance and comparison with other products, The pricing of the product is great. From a well renownd brand you receive a performance exhaust system that is made using high quality materials and has a design all of it's own. It's the best value big performance header pipe exhaust system you can purchase.About shipping and packaging, Made to order so had to wait two months before it was in stock but my order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived very quickly via EMS and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail