I find the Takegawa clutch cover to be the better option to purchase

It is for the stock 4 speed honda monkey transmission. Excellent feeling of gear change and also good oil flow with filter that can be easily replaced View Detail

About quality and texture - The wire type special clutch cover kit from SP Takegawa is made from mostly cast aluminium but billet and forged pieces can also be found, the quality from the overall fit and finish is perfect.About the feeling of use - As you can see from the photo, there is a lot going on here and the special clutch cover is involved with quite a bit of it. Very much enjoy all the design and details that have gone into manufacturing this clutch cover and can highly recommend it to anyone looking to swap out their original clutch cover.Products to buy together - With so many addon available for this special clutch cover, my key product to purchase to further increase it's use would be the oil cooler especially when you consider the top end engine kit that has been fitted.Difficulty of installation - The installation of the special clutch cover is a intermediate task that took 1.5 hours to complete. Mechanical aptitude and the use of hand tools and a few special tools is what is required to access the engine internals, remove the centrifugal oil filter, assemble and fit the clutch cover to then finish with a clutch adjustment. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the special clutch cover is priced higher then its competitor.About shipping and packaging - With there only being a small cost difference between sea freight and EMS for the special clutch cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic.View Detail

I was super happy with this kit! I couldnt believe how well it fitted and the bike ran well with the factory settings. Super happy and would order againView Detail

This is my favorite clutch cover for the Monkey / Grom / MSX, of course you can get it with a dry clutch etc but in this configuration its really good value. It's best when pared with the optional thermostat so you dont over cool the oil. I've personally purchased two of these on different occasions and always recomend them to people. I perfer this one over the Kitaco version as it offers the thermostat. I think these and a good tune are the key to a reliable long lasting bigbore setup. View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of cast aluminum for the crankcase cover, forged aluminum for the clutch access cover and machined aluminum for the oil filter cover.About the feeling of use, I also have experience using the Kitaco clutch cover and overall I find the Takegawa clutch cover to be the better option to purchase.Products to buy together, Adding An adjustable clutch lever to your cart to help personalization your clutch setup would be ideal.Difficulty of installation, I can say the fitment of the clutch cover kit for my installation was average, there is special tooling needed and the process of removing the unwanted original Honda parts and installing the new Takegawa parts is involved.Cost performance and comparison with other products, The pricing of this product is great when compared to all the other types of clutch cover kits that Takegawa offer because you a utilising all the original clutch parts. You receive a complete kit that is made from quality materials with a design ahead of the others .About shipping and packaging My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of cast aluminum for the crankcase cover, forged aluminum for the clutch access cover and machined aluminum for the oil filter cover.About the feeling of use, I also have experience using the Kitaco clutch cover and overall I find the Takegawa clutch cover to be the better option to purchase.Products to buy together, Adding an adjustable clutch lever to your cart to help personalization your clutch setup would be ideal.Difficulty of installation, I can say the fitment of the clutch cover kit for my installation was average, there is special tooling needed and the process of removing the unwanted original Honda parts and installing the new Takegawa parts is involved.Cost performance and comparison with other products, The pricing of this product is great when compared to all the other types of clutch cover kits that Takegawa offer because you a utilising all the original clutch parts. You receive a complete kit that is made from quality materials with a design ahead of the others .About shipping and packaging My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish.About the feeling of use, This set of Honda stickers just look great on the fuel tank of my custom build and even with the bike spending most of it's life out in the sun the black and gold colouring shows no signs of fading.Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding.Difficulty of installation, I can say the fitment of the stickers for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the stickers to help the adhesive have the best chance of adhering to the plastic.Cost performance and comparison with other products, The pricing of this product is great. Your receive two strickers that are of a good size and great quality from a well known brand. The pricing of stickers similar to these that are part number specific to a bike will be much higher.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This cool G-Craft sticker is the perfect size for adding to the side cover on the Monkey 125 to complement your G-Craft build with this fine detail.Products to buy together, Other branded stickers from the likes of Kitaco, SP Takegawa and Over Racing would be ideal to add to my cart for some additional detailing for parts I have added to my Honda Monkey 125.Difficulty of installation, I can say the fitment of the sticker for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the sticker to help the adhesive have the best chance of adhering to the paint.Cost performance and comparison with other products, The pricing of this product is good and but higher per sticker to what other brands offer. You receive one stricker that are great quality with fine detailing from a well known brand.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This Moriwaki trademark sticker is the perfect size for adding a little detail to those plain black plastic parts on the bike like the hugger.Products to buy together, Other branded stickers from the likes of Takegawa, NGK and DID would be ideal to add to your cart for some additional detailing since they sell many parts for bikes.Difficulty of installation, I can say the fitment of the sticker for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the sticker to help the adhesive have the best chance of adhering to the plastic.Cost performance and comparison with other products, The pricing of this product is great and similar to what other brands offer. You receive a two strickers that is a handy size and great quality from a well known brand.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used is aluminum for the muffler sleeve and stainless steel for the header pipe.About the feeling of use, I bought this exhaust system as I was looking for a low mount high performance system at an affordable price. Big performance header pipe with a 25mm inlet and 50mm outlet to help obtain the most out of my modified engine and comes with a unique shaped aluminum muffler sleeve.Products to buy together, Being a low mount exhaust system, the side of the Monkey 125 is left exposed when the high mount exhaust system is removed so a right side cover would be ideal to also add to your cart.Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from one end to the other lined up perfectly.Cost performance and comparison with other products, The pricing of the product is great. From a well renownd brand you receive a performance exhaust system that is made using high quality materials and has a design all of it's own. It's the best value big performance header pipe exhaust system you can purchase.About shipping and packaging, Made to order so had to wait two months before it was in stock but my order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived very quickly via EMS and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail