Learning from our predecessors, we added a return circuit with Orifice from the air cleaner, and then added a new circuit with Orifice Operation at
? About blowing up
It's the effect I was hoping for, but it's a dull effect that I wouldn't feel if I changed the pre-road of my suspension To be honest, I haven't experienced it much because of the
However, as you can see below, the rotation becomes much smoother, so there is a definite increase in the efficiency of the Engine It is likely to be effective
? About vibration mitigation
It is very effective
ST250 is not good at high rotation and has a large vibration, but with the FSprocket 16T conversion In combination, the vibration problem has been considerably improved
Fine vibrations are indeed hard to get rid of, but vibrations that make your hands shake will disappear
Up to 4,000 rpm, you won't feel any vibration at all, and it's as smooth as a multi-cylinder engine Fee Ring
To improve handling, we have changed from OEM's heavy and heavy Bar End to just resin The weight was reduced to Cap-type Bar End, so the handlebar has no weight at all But still, vibration is not a problem
This is why, even on the highway, except that the OEM exhaust is clogged up and acceleration is slow and the passengers are dimwitted Since the Minus is capable of cruising at 100 km/h comfortably, the ST is often said to be unsuitable for high speed We were able to get rid of the points
By the way, the Grip with earthquake-resistant Gel that I purchased separately became unnecessary and was put into storage without being used This was the case
About the ?Others effect
The installation of an outdoor air intake route from the air cleaner will allow the ventilation in the Crankcase to be reduced The structure is designed to allow for
So, especially in the summer, you have to exhaust the Valve so hot that you can burn yourself if you touch it with your bare hands This may have an effect on preventing the temperature rise of the Engine
The oft-quoted embarrassment reduction may also be slightly less efficient due to the above, but the intensity of the OEM has shown improvement
I feel that this Valve, while expensive, has a definite effect that is not the same as Occult Parts
However, it's worth considering whether the effect is really what you want and whether it's worth the Cost It's not the kind of Parts that you can easily say you can just put on
But at least for myself, it was a good part to install
In addition, if you are going to wear these parts, it is good to warm up the air properly
If you don't have a return circuit, especially if you don't have a return circuit, there is a risk that the internal pressure will be reversed and high until the Valve works stably Because there are
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING