64,807.74 KHR
(2,423 JPY)
62,133.05 KHR
(2,323 JPY)
(4% OFF)
4 (8 Reviews)
Excellent
This is a good part.bremboCasting, opposed 4 pods, 1 pcPin Caliper. Originally it is to prevent Pad from returning when Wheel in Race is exchanged during Race and to prevent the occurrence of time loss, but since Tension is applied in the direction that Pad opens from this shape, Pad separation is very good Then, unpleasant drag was solved. In addition, it reacts to Linear even for subtle input at the beginning of Brake's hand grip, making Brake operation fun. Pretty Recommendation.
Reviews For OHNO-SPEED Stainless Steel Pat Spring for Endurance From Other Webike User
Excellent
It lives up to its reputation!This is my impression after driving about 100km with it installed.
The wheel idle at the front up while parking is totally different. Before the replacement, the pad that was rubbing must have been in the way.
I can hear the sound of the Pad dancing with BrakeRelease of the push walk.
I could not feel the difference during driving unless I was very careful. The initial bite is smoother now.
When I released the car from a cornering position, the braking was released smoothly and it was an interesting sensation.
A simple part like this can change a lot.View Detail
Average
Brushbo effectQuantity with Durable Race:Pair (for Left and Right) It seems that the purpose of the Parts is to open to the Wheel and remove it easily
When I picked it up, the Spring force was weak and it felt like nothing was going to happen, but it was a good Pad away from the disc and the dragging feeling was gone
I'm not able to discern which one is more effective, since I'm also doing a Caliper wash, so I may just be wondering But..
I think it works because they sell this weird stuff
it is attached to the brembo sand, but it can be assembled with Pad spring, but it opens with this I'm sure it's not easy to get an effect, so it's probably not the right one. After the photo, I took the board Spring
View Detail
Average
Maybe you could even make your ownthe brembo 4 potCasting caliper doesn't have a lot of Pad dragging ?
I was the same way
I would try to rub it out to see what I could do about it, but I couldn't get rid of it
I bought this to try it out and put it on
It feels softer to the touch in my hand than I expected, and I have to admit Are you sure this thing is large enough? I was under the impression that..
LargeIt's sturdy!
And the dragging of the Pad is a nice touch!
Cleaning the Caliper makes it easy to remove and install the Pad pin
But this one is stuck in the remaining thickness of the Pad and stays in place
When the pad is getting low.. ・ Wouldn't it get stuck between Pad and Rotor? I'll try to worry about it
Well, as long as you check it often and replace the Pad as soon as possible, there's no problem
Also, the material is Stainless Steel piano wire (spring wood) 1.2φ about
I sometimes make my own Bus fishing lure, but it's just about this thickness (a little more (Is it thick?) I have the Stainless Spring material of
If you buy one and pay this Gold amount, how many cars could you make if you bought the materials for this Gold amount? Huh?
Since we're playing with the Motorcycle at our own risk anyway, is it possible to build our own? I think about it
(Sorry, Webike, I'm sorry But I'm not trying to interfere with product sales.)
Spring material is hard and bending it is Large strange, though
If you want to get rid of the pad drag of the casting caliper, make a sample and get the same kind of product If you want to make your own, I might recommend itView Detail
Excellent
This may be an invention (^_^)Far from this Pad spring, Pad does not disturb the movement to return, because the Tension is hanging in the direction of Pad returning, the drag was resolved splendidly! It is especially recommended for those who are suffering from the same trouble.View Detail
Most Viewed Reviews Of OHNO-SPEED Other Brake Parts
Excellent
It lives up to its reputation!This is my impression after driving about 100km with it installed.
The wheel idle at the front up while parking is totally different. Before the replacement, the pad that was rubbing must have been in the way.
I can hear the sound of the Pad dancing with BrakeRelease of the push walk.
I could not feel the difference during driving unless I was very careful. The initial bite is smoother now.
When I released the car from a cornering position, the braking was released smoothly and it was an interesting sensation.
A simple part like this can change a lot.View Detail
Average
Brushbo effectQuantity with Durable Race:Pair (for Left and Right) It seems that the purpose of the Parts is to open to the Wheel and remove it easily
When I picked it up, the Spring force was weak and it felt like nothing was going to happen, but it was a good Pad away from the disc and the dragging feeling was gone
I'm not able to discern which one is more effective, since I'm also doing a Caliper wash, so I may just be wondering But..
I think it works because they sell this weird stuff
it is attached to the brembo sand, but it can be assembled with Pad spring, but it opens with this I'm sure it's not easy to get an effect, so it's probably not the right one. After the photo, I took the board Spring
View Detail
Average
Maybe you could even make your ownthe brembo 4 potCasting caliper doesn't have a lot of Pad dragging ?
I was the same way
I would try to rub it out to see what I could do about it, but I couldn't get rid of it
I bought this to try it out and put it on
It feels softer to the touch in my hand than I expected, and I have to admit Are you sure this thing is large enough? I was under the impression that..
LargeIt's sturdy!
And the dragging of the Pad is a nice touch!
Cleaning the Caliper makes it easy to remove and install the Pad pin
But this one is stuck in the remaining thickness of the Pad and stays in place
When the pad is getting low.. ・ Wouldn't it get stuck between Pad and Rotor? I'll try to worry about it
Well, as long as you check it often and replace the Pad as soon as possible, there's no problem
Also, the material is Stainless Steel piano wire (spring wood) 1.2φ about
I sometimes make my own Bus fishing lure, but it's just about this thickness (a little more (Is it thick?) I have the Stainless Spring material of
If you buy one and pay this Gold amount, how many cars could you make if you bought the materials for this Gold amount? Huh?
Since we're playing with the Motorcycle at our own risk anyway, is it possible to build our own? I think about it
(Sorry, Webike, I'm sorry But I'm not trying to interfere with product sales.)
Spring material is hard and bending it is Large strange, though
If you want to get rid of the pad drag of the casting caliper, make a sample and get the same kind of product If you want to make your own, I might recommend itView Detail
Excellent
This may be an invention (^_^)Far from this Pad spring, Pad does not disturb the movement to return, because the Tension is hanging in the direction of Pad returning, the drag was resolved splendidly! It is especially recommended for those who are suffering from the same trouble.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING